Heavy slag remover
塑成型或采用耐磨不锈钢精制而成，底部配置陶瓷锥体、陶瓷除砂嘴。 This equipment is a device that uses the centrifugal principle to remove heavy impurities in the slurry. The monomer is made of wear-resistant polymer in one injection molding or refined with wear-resistant stainless steel. The bottom is equipped with a ceramic cone and a ceramic sand removing nozzle. 浆料净化系统除去浆料中比纤维比重大的沙砾、尘埃、涂料颗粒等细小杂质和废纸 脱墨系统中去除较大的油墨粒子。 It is suitable for various slurry purification systems to remove small impurities such as grit, dust, coating particles with a larger specific fiber ratio in the slurry, and larger ink particles in waste paper deinking systems.
|Single throughput||380 ~ 450L / min, 600 L / min, 1000 L / min|
|Density Concentration of feeding slurry:||0.50 ~ 1.2%|
|Pressure of feeding slurry||0.20 ~ 0.30Mpa|
|Pressure of fine slurry||0.08 ~ 0.10Mpa|
|Pressure drop||0.12 ~ 0.2Mpa|
|Temperature of slurry||＜ 60 ℃|